Projector Zone
888.740.9676sales@projectorzone.comM
"I appreciate you guys...I received my shipment a day sooner than expected. I have not set up the screen yet, but as far as delivery of product...EXCELLENT! thanks!"
-- LARRY T., UPPER MARLBORO, MD
"Customer service was outstanding and really stepped up to the plate to get our product here as quickly as possible."
-- Darlene B., Costa Mesa, CA
FSR CDA-2EQA High-Res VGA Distribution Amp with Audio 1x2
List Price: $189.00
Sale Price: $150.00
Manufacturer: FSR
Part Number: FSR-CDA-2EQA
Shipping Availability: Contact us for availability
Questions? Contact a team member:
Toll Free 1.888.740.9676
Email sales@projectorzone.com
FSR CDA-2EQA High Resolution 1x2 Distribution Amplifier
The FSR CDA-2EQA is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device requiring a longcable run are utilized.The remote output is equalized to maintain excellent signal integrity for even the highest video resolutions. Cable runs of up to 175' are possible with 170 MHz of full amplitude bandwidth and +/- 0.4dB flatness to a 150 MHz.
A half amplitude signal yields 270 MHz of bandwidth and +/- 0.4dB flatness to 235 MHz, nearly 16 times better than cable alone. This means that the signal that you feed into the CDA-2EQA will arrive at the far end of the cable with an almost immeasurable amount of loss and no distortion due to peaking effects.
The local monitor output passes ID bits to the host computer to maintain compatibility with Mac and Windows based computers.
The CDA-2EQA incorporates a mini stereo input jack on the front and a 5 position pluggable captive screw terminal on the back for balanced stereo audio output. An active audio balancing circuit ensures long, noise free stereo audio cable runs from the point of installation to the house sound system.
Manufacturer Part Number:
- Limited One Year
• Ultra High Bandwidth
• Flat Frequency Response
• Local Monitor Output
• Integrated Line Driver with Cable EQ
• Active Audio Balancing
• Includes Power Supply and All Mounting Hardware
VIDEO INPUT
Number/Type: 1 RGBHV
Connectors: 15 pin HD female
Level (nominal): Analog 0.7 Vp-p
Level (maximum): 2 Vp-p
Impedance: 75 ohms
Max Resolution:Up to QXGA (2048 x 1536 @ 60Hz)
EQUALIZED VIDEO OUTPUT
Number/Type: 1 RGBHV
Connectors: One 15 pin HD female
Bandwidth:
This performance data is based on the CDA-2EQA plus the specified length of WP8255 (West Penn) cable with a full amplitude (0.7v P-P) signal applied.
• 50' cable 308 MHz (-3dB) 0-215 MHz +/-0.25dB (With no cable 500 MHz)
• 100' cable 225 MHz (-3dB) 0-180 MHz +/-0.25dB
• 150' cable 173 MHz (-3dB) 0-150 MHz +/-0.25dB
This performance data is based on the CDA-2EQA plus the specified length of WP8255 (West Penn) cable with a half amplitude (0.35v P-P) signal applied.
• 50' cable 507 MHz (-3dB) 0-350 MHz +/-0.4dB (With no cable 500 MHz)
• 100' cable 357 MHz (-3dB) 0-300 MHz +/-0.4dB
• 150' cable 270 MHz (-3dB) 0-235 MHz +/-0.4dB
Level (nominal): Unity / User adjustable via HI / MED / LOW Jumper
Gain: HI = 125' to 175', MED = 60' to 125', LOW = 0' to 60'
Impedance: 75 ohms
Design Cable: West Penn WP8255 or equal
LOCAL VIDEO OUTPUT
Number/type: 1 RGBHV
Connectors: One 15 pin HD female
Bandwidth: 300MHz @ -3dB
Gain: Unity (buffered)
Impedance: 75 ohms
SYNC
Input level: 2.0 Vp-p to 5.0 Vp-p
Output level:4.0 Vp-p into Hi-Z, 2.0 Vp-p into 75 ohm
Input Impedance:511 ohms
Output impedance: 75 ohms
Polarity: Positive or negative
Horizontal frequency: 15 kHz - 200 kHz
Vertical frequency: 30 Hz - 150 Hz
POWER Wall Transformer (provided) with locking connector 9Vac @ 500 ma
AUDIO
Bandwidth: 20 Hz to 20 kHz (+/-0.05 dB)
THD + Noise: 0.01% @ 20 kHz at rated
Max Output S/N >98 dB
Noise Floor: < 98 dB
Stereo separation: -90 dB @ 1 kHz
AUDIO INPUT
Number/type: 2 stereo unbalanced
Connectors: Two 3.5mm stereo mini connectors
Impedance: 10K Ohms unbalanced
Max level: +6 dBm
AUDIO OUTPUT
Number/type: 1 Balanced Stereo (may be used in
unbalanced configuration)
Connector: 5 Position mini Phoenix
Impedance: 50 ohms
Gain: + 6 dB balanced or unbalanced
Maximum Level:
(with 600 ohms load)
• +12 dBm balanced
• +6 dBm unbalanced
(Hi-Z)
• +14 dBm balanced
• +8 dBm unbalanced
Ground:
$8.03
3-Day Air:
$15.06
2-Day Air:
$22.57
Next Day Air:
$44.17
--------------------------------------
Alaska & Hawaii: Economy:
$19.58
Alaska & Hawaii: 2-Day Air:
$28.21
Alaska & Hawaii: Next Day Air:
$53.00
--------------------------------------
Canada: Ground:
$14.45
Canada: 3-Day Air:
$24.10
Canada: 2-Day Air:
$33.86
Canada: Next Day Air:
$61.84
--------------------------------------
Guam / Puerto Rico:
$18.46
Contact us regarding shipment to FPO/APO addresses.
